The KWh On The Datasheet Is Not The Backup Time On The Quote

Nov 17, 2026

Leave a message

Two LiFePO4 offers can show the same kilowatt-hour figure and still deliver very different nights of backup. The number on the datasheet is the nameplate. The number the customer remembers is how long the lights, the fridge, and the internet stayed on. If those two are not connected in the quotation, the complaint arrives after the first outage, not at the enquiry stage.

Distributors who sell CHUHAN storage already work across a wide range of nameplates: a 5.12 kWh wall-mounted all-in-one for a compact home, a 16 kWh 51.2 V 314 Ah floor-standing tower for a typical household, and a 20 kW / 50 kWh outdoor cabinet for small commercial sites. The method for talking about runtime should be the same at every size.

Separate nameplate, usable energy, and the reserve you do not sell

Nameplate kWh is the rated capacity of the battery. Usable energy is lower. Depth of discharge, a reserve the installer wants to keep in the battery, and conversion losses through the hybrid inverter all reduce what you can honestly promise.

A practical way to present this on a quote is to show three figures, not one:

  • Nameplate capacity
  • The usable energy you are willing to sell (after the depth of discharge and reserve you have agreed)
  • An estimated backup range at a stated essential load, in kW, not at an unnamed "whole house" load

If you only print the nameplate, a 16 kWh tower can be read as "16 hours of backup," which is only true at a 1 kW average load and a full discharge you may not want to use. The same tower at a 3 kW essential load is a different conversation.

Read cycle-life and service-life lines with their conditions

Storage listings often include cycle life and service life. Those lines are not free of conditions. On the public specification graphic for the CHUHAN 20 kW / 50 kWh outdoor cabinet family, cycle life is stated as more than 6,000 cycles at 25°C and 80% depth of discharge, and service life as 10 years at 25°C. The same graphic lists a nominal capacity of 51.2 kWh for that cabinet.

When you compare two offers, copy the conditions with the claim. A cycle figure given at 80% depth of discharge is not comparable, on its own, with a figure that does not state temperature or depth of discharge. If a listing does not show the conditions, do not fill them in. Ask.

Three scenes, three different kWh questions

Home, evening outage. Start from the essential-load list - lighting, refrigeration, communications - and the hours the family wants to cover. A 5.12 kWh wall unit and a 16 kWh tower are not interchangeable here; they are different backup windows at the same load. The hybrid inverter's power rating still has to cover the peak, including any surge from a fridge or a pump.

Depot or workshop, overnight. The question is often energy for tools, lighting, and sometimes several AC wallboxes, not a single household fridge. Overnight charging can be scheduled, but if vehicles must charge from the battery while the grid is down, the kWh maths changes quickly. Do not use a home-tower nameplate as if it were depot storage.

Small commercial site, peak shaving. Here the buyer may care less about "hours of lights" and more about how many kilowatts can be discharged during an expensive peak, and how often. The 20 kW / 50 kWh outdoor cabinet is built as an all-in-one high-voltage LiFePO4 system in an IP54 enclosure, with grid-tied, off-grid, and UPS backup modes shown for the series. Quote discharge power and usable energy against the site's peak window, not against a residential backup story.

How to write hours of backup without over-promising

Give a range, name the load, and name the assumptions. For example: "At a 2 kW essential load, with the usable energy we have specified, backup is in the range of X to Y hours." Do not quote a single precise hour count if the customer's load is still a guess. And do not add an EV charger into that window unless the customer has asked for it and the battery can support it.

What to put in the storage enquiry

  • The essential-load list and the average power you assume, in kW
  • Hours of backup the customer expects, and whether whole-house backup was requested
  • Whether the battery is for self-consumption, backup, peak shaving, or a mix
  • Single-phase or three-phase supply, and the hybrid inverter being considered
  • Indoor wall, floor-standing tower, or outdoor cabinet constraints at the site

CHUHAN manufactures LiFePO4 energy storage, hybrid inverters, and EV chargers in our factory in Yueqing, Zhejiang. If you send the load and the hours, not only the nameplate you hope to sell, we can help you choose a battery size you can defend after installation.

Website: https://www.chinachuhan.com/

Email: sales03@chinachuhan.com

WhatsApp: +86 189 6895 8968

Send Inquiry
Send Inquiry